Aurivian Media Group logo
Mix Bus & Mastering Chain: A Clean Starting Point — mix bus and mastering guide by Aurivian Media Group
 Back to Blog
Mixing & Mastering

Mix Bus & Mastering Chain: A Clean Starting Point

Aurivian Media Group7 min read

Most mixes fall apart at the finish line because the mix bus is doing too much. The goal isnt to make it loud early  its to make it stable, controlled, and easy to master.

1) Start with headroom (before any plugins)

Before you touch a limiter, make sure your mix has space to breathe. A clean target is peaks around -6 dBFS on the stereo bus with the loudest section playing.

If your mix is already slamming 0 dBFS, youre forcing every plugin after it to fight distortion and pumping.

2) EQ: fix the big problems, not the vibe

A gentle high-pass (around 2060 Hz depending on the track) can clear sub-rumble that eats limiter headroom.

If the mix feels harsh, dont carve the whole top end. Find the harsh range (often 26 kHz) and make small, wide moves.

3) Glue compression: 13 dB of gain reduction

This is where people overdo it. Your mix bus compressor should feel like its holding the track together, not changing the groove.

Try a slower attack to keep transients (kick/snare) alive, and a release that returns to zero in time with the tempo.

4) Saturation (optional): add density without clipping

A touch of saturation can make a mix feel louder and fuller without pushing the limiter as hard.

Keep it subtle. If the low end gets fuzzy or the vocal loses clarity, back it off.

5) Limiter: last in chain, set the ceiling

Set your output ceiling (commonly -1.0 dBTP for streaming safety). Then bring the threshold down until the mix hits your loudness goal.

If youre getting more than a few dB of limiting, its a sign the mix needs balancing  not more limiting.

6) Translation check: phones, car, and low volume

Turn it down. If the vocal disappears or the kick vanishes, the balance is off.

Check mono compatibility and make sure the low end doesnt collapse.

Key Takeaway

A great master starts with a stable mix bus. If your limiter is doing all the work, the mix isnt finished yet.

mix busmasteringlimitercompressionloudness

Want a mix that translates everywhere? See our production services or book a session.

Ready for a clean, release-ready mix?

Book a Session